|
0
|
1 |
#################################################################################
|
|
|
2 |
#
|
|
|
3 |
################################################################################
|
|
|
4 |
record(stringin, "$(IOC):$(NAME)-NAME")
|
|
|
5 |
{
|
|
|
6 |
field(DESC, "Name of the device")
|
|
|
7 |
field(VAL, "$(NAME) Device")
|
|
|
8 |
field(PINI, "YES")
|
|
|
9 |
}
|
|
|
10 |
|
|
|
11 |
record(stringin, "$(IOC):$(NAME)-IDN")
|
|
|
12 |
{
|
|
|
13 |
field(DESC, "Name of the device")
|
|
|
14 |
field(INP, "@devBronkhorst.proto identity $(PORT)")
|
|
|
15 |
field(PINI, "YES")
|
|
|
16 |
}
|
|
|
17 |
|
|
|
18 |
################################################################################
|
|
|
19 |
################################################################################
|
|
|
20 |
#INTEGER PARAMETERS
|
|
|
21 |
################################################################################
|
|
|
22 |
################################################################################
|
|
|
23 |
################################################################################
|
|
|
24 |
# Read; Measure will return a value between -23593 and 41942
|
|
|
25 |
# Record $(IOC):$(NAME)-MEASURE recomputes this value to percentages. NOTE that percentage
|
|
|
26 |
# can be larger than 100% (max value: 131.07%) and even negative for bipolar
|
|
|
27 |
# ADC mode. (min value: -73.73%)
|
|
|
28 |
################################################################################
|
|
|
29 |
record(ai, "$(IOC):$(NAME)-GET-MEASURE_")
|
|
|
30 |
{
|
|
|
31 |
field(DESC, "Read measure")
|
|
|
32 |
field(SCAN, "$(SCAN2)")
|
|
|
33 |
field(DTYP, "stream")
|
|
|
34 |
field(PREC, "3")
|
|
|
35 |
field(INP, "@devBronkhorst.proto readInt(01,20) $(PORT)")
|
|
|
36 |
field(FLNK, "$(IOC):$(NAME)-GET-MEASURE")
|
|
|
37 |
}
|
|
|
38 |
|
|
|
39 |
record(calc, "$(IOC):$(NAME)-GET-MEASURE")
|
|
|
40 |
{
|
|
|
41 |
field(DESC, "Measure to percentage")
|
|
|
42 |
field(INPA, "$(IOC):$(NAME)-GET-MEASURE_")
|
|
|
43 |
field(EGU, "%")
|
|
|
44 |
field(PREC, "3")
|
|
|
45 |
field(CALC, "A*100/32000")
|
|
|
46 |
field(FLNK, "$(IOC):$(NAME)-COMM-STATUS")
|
|
|
47 |
}
|
|
|
48 |
|
|
|
49 |
|
|
|
50 |
################################################################################
|
|
|
51 |
# Read; $(IOC):$(NAME)-GET-SETPOINT_ fetches the value from the device,
|
|
|
52 |
# $(IOC):$(NAME)-GET-SETPOINT recalculates the value to percentages.
|
|
|
53 |
#
|
|
|
54 |
# $(IOC):$(NAME)-GET-SETPOINT_ is scanned periodically, because setpoint value can be
|
|
|
55 |
# changed on ALARM or when the Counter reaches it's limit - this is configured
|
|
|
56 |
# by the user
|
|
|
57 |
################################################################################
|
|
|
58 |
record(ai, "$(IOC):$(NAME)-GET-SETPOINT_")
|
|
|
59 |
{
|
|
|
60 |
field(DESC, "Read setpoint in raw [0,32000]")
|
|
|
61 |
field(DTYP, "stream")
|
|
|
62 |
field(SCAN, "$(SCAN2)")
|
|
|
63 |
field(INP, "@devBronkhorst.proto readInt(01,21) $(PORT)")
|
|
|
64 |
field(PREC, "1")
|
|
|
65 |
field(PINI, "YES")
|
|
|
66 |
field(FLNK, "$(IOC):$(NAME)-GET-SETPOINT")
|
|
|
67 |
}
|
|
|
68 |
|
|
|
69 |
record(calc, "$(IOC):$(NAME)-GET-SETPOINT")
|
|
|
70 |
{
|
|
|
71 |
field(DESC, "Setpoint to percentage")
|
|
|
72 |
field(INPA, "$(IOC):$(NAME)-GET-SETPOINT_")
|
|
|
73 |
field(EGU, "%")
|
|
|
74 |
field(PREC, "1")
|
|
|
75 |
field(CALC, "A*100/32000")
|
|
|
76 |
}
|
|
|
77 |
|
|
|
78 |
################################################################################
|
|
|
79 |
# Write; User writes the flow percentage to $(IOC):$(NAME)-SET-SETPOINT.
|
|
|
80 |
# $(IOC):$(NAME)-SET-SETPOINT_ recalculates the percentage to interval [0, 32000] and
|
|
|
81 |
# writes the new setpoint to the device
|
|
|
82 |
################################################################################
|
|
|
83 |
record(ao, "$(IOC):$(NAME)-SET-SETPOINT")
|
|
|
84 |
{
|
|
|
85 |
field(DESC, "Setpoint in percentage")
|
|
|
86 |
field(EGU, "%")
|
|
|
87 |
field(PREC, "1")
|
|
|
88 |
field(FLNK, "$(IOC):$(NAME)-SET-SETPOINT_")
|
|
|
89 |
}
|
|
|
90 |
|
|
|
91 |
record(calcout, "$(IOC):$(NAME)-SET-SETPOINT_")
|
|
|
92 |
{
|
|
|
93 |
field(DESC, "Write setpoint in raw [0,32000]")
|
|
|
94 |
field(INPA, "$(IOC):$(NAME)-SET-SETPOINT")
|
|
|
95 |
field(PREC, "1")
|
|
|
96 |
field(DTYP, "stream")
|
|
|
97 |
field(CALC, "A*32000/100")
|
|
|
98 |
field(OUT, "@devBronkhorst.proto writeInt(01,21) $(PORT)")
|
|
|
99 |
field(FLNK, "$(IOC):$(NAME)-GET-SETPOINT_")
|
|
|
100 |
}
|
|
|
101 |
|
|
|
102 |
record(calcout, "$(IOC):$(NAME)-SET-SP-INIT_"){
|
|
|
103 |
field(INPA, "$(IOC):$(NAME)-SET-SETPOINT_")
|
|
|
104 |
field(CALC, "A*100/32000")
|
|
|
105 |
field(OUT, "$(IOC):$(NAME)-SET-SETPOINT")
|
|
|
106 |
field(PINI, "YES")
|
|
|
107 |
field(FLNK, "$(IOC):$(NAME)-SET-SETPOINT")
|
|
|
108 |
|
|
|
109 |
}
|
|
|
110 |
|
|
|
111 |
################################################################################
|
|
|
112 |
# Read/Write: Setpoint is ramped from 0% to 100% in slope*0.1 seconds
|
|
|
113 |
################################################################################
|
|
|
114 |
record(ai, "$(IOC):$(NAME)-GET-SETPOINT-SLOPE")
|
|
|
115 |
{
|
|
|
116 |
field(DESC, "Read setpoint slope")
|
|
|
117 |
field(DTYP, "stream")
|
|
|
118 |
field(SCAN, "$(SCAN1)")
|
|
|
119 |
field(PINI, "YES")
|
|
|
120 |
field(INP, "@devBronkhorst.proto readInt(01,22) $(PORT)")
|
|
|
121 |
}
|
|
|
122 |
|
|
|
123 |
record(ao, "$(IOC):$(NAME)-SET-SETPOINT-SLOPE")
|
|
|
124 |
{
|
|
|
125 |
field(DESC, "Write setpoint slope")
|
|
|
126 |
field(DTYP, "stream")
|
|
|
127 |
field(SCAN, "$(SCAN1)")
|
|
|
128 |
field(OUT, "@devBronkhorst.proto writeInt(01,22) $(PORT)")
|
|
|
129 |
field(FLNK, "$(IOC):$(NAME)-GET-SETPOINT-SLOPE")
|
|
|
130 |
}
|
|
|
131 |
|
|
|
132 |
################################################################################
|
|
|
133 |
# Read/Write: Get control mode from device. One of $(IOC):$(NAME)-CTRL-MODE-1/2_ will
|
|
|
134 |
# be in illegal value state. The GUI screen will show the one which is not in
|
|
|
135 |
# illegal value state by checking the severity of the state
|
|
|
136 |
################################################################################
|
|
|
137 |
record(ai, "$(IOC):$(NAME)-GET-CTRL-MODE_")
|
|
|
138 |
{
|
|
|
139 |
field(DESC,"")
|
|
|
140 |
field(DTYP, "stream")
|
|
|
141 |
field(SCAN, "$(SCAN1)")
|
|
|
142 |
field(INP, "@devBronkhorst.proto readChar(01,04) $(PORT)")
|
|
|
143 |
field(PINI, "YES")
|
|
|
144 |
field(FLNK, "$(IOC):$(NAME)-CTRL-MODE-1_")
|
|
|
145 |
}
|
|
|
146 |
|
|
|
147 |
record(mbbi, "$(IOC):$(NAME)-CTRL-MODE-1_")
|
|
|
148 |
{
|
|
|
149 |
field(DESC, "Control modes 0-15")
|
|
|
150 |
field(DTYP, "Raw Soft Channel")
|
|
|
151 |
field(INP, "$(IOC):$(NAME)-GET-CTRL-MODE_")
|
|
|
152 |
field(UNSV, "MAJOR")
|
|
|
153 |
field(ZRVL, "0")
|
|
|
154 |
field(ZRST, "BUS/RS232")
|
|
|
155 |
field(ONVL, "1")
|
|
|
156 |
field(ONST, "Analog input")
|
|
|
157 |
field(TWVL, "2")
|
|
|
158 |
field(TWST, "FLOWBUS*FLOWBUS")
|
|
|
159 |
field(THVL, "3")
|
|
|
160 |
field(THST, "Close valve")
|
|
|
161 |
field(FRVL, "4")
|
|
|
162 |
field(FRST, "Controller idle")
|
|
|
163 |
field(FVVL, "5")
|
|
|
164 |
field(FVST, "Testmode")
|
|
|
165 |
field(SXVL, "6")
|
|
|
166 |
field(SXST, "Tuning mode")
|
|
|
167 |
field(SVVL, "7")
|
|
|
168 |
field(SVST, "Setpoint=100%")
|
|
|
169 |
field(EIVL, "8")
|
|
|
170 |
field(EIST, "Purge valve")
|
|
|
171 |
field(NIVL, "9")
|
|
|
172 |
field(NIST, "Calibration mode")
|
|
|
173 |
field(TEVL, "10")
|
|
|
174 |
field(TEST, "analogIn*FLOWBUS")
|
|
|
175 |
field(ELVL, "11")
|
|
|
176 |
field(ELST, "Keyboard||FLOWBUS")
|
|
|
177 |
field(TVVL, "12")
|
|
|
178 |
field(TVST, "Setpoint=0%")
|
|
|
179 |
field(TTVL, "13")
|
|
|
180 |
field(TTST, "FLOWBUS*analogIn")
|
|
|
181 |
field(FTVL, "14")
|
|
|
182 |
field(FTST, "Range select mode")
|
|
|
183 |
field(FFVL, "15")
|
|
|
184 |
field(FFST, "Manual start, auto end")
|
|
|
185 |
field(FLNK, "$(IOC):$(NAME)-CTRL-MODE-2_")
|
|
|
186 |
}
|
|
|
187 |
|
|
|
188 |
record(mbbi, "$(IOC):$(NAME)-CTRL-MODE-2_")
|
|
|
189 |
{
|
|
|
190 |
field(DESC, "Control modes 0-15")
|
|
|
191 |
field(DTYP, "Raw Soft Channel")
|
|
|
192 |
field(INP, "$(IOC):$(NAME)-GET-CTRL-MODE_")
|
|
|
193 |
field(UNSV, "MAJOR")
|
|
|
194 |
field(ZRSV, "MAJOR")
|
|
|
195 |
field(ONVL, "16")
|
|
|
196 |
field(ONST, "Auto start, manual end")
|
|
|
197 |
field(TWVL, "17")
|
|
|
198 |
field(TWST, "Auto start/end")
|
|
|
199 |
field(THVL, "18")
|
|
|
200 |
field(THST, "RS232 setpoint")
|
|
|
201 |
field(FRVL, "19")
|
|
|
202 |
field(FRST, "RS232 broadcast")
|
|
|
203 |
field(FVVL, "20")
|
|
|
204 |
field(FVST, "Valve stearing")
|
|
|
205 |
field(SXVL, "21")
|
|
|
206 |
field(SXST, "Analog valve stearing")
|
|
|
207 |
field(SVVL, "22")
|
|
|
208 |
field(SVST, "Valve safe state")
|
|
|
209 |
}
|
|
|
210 |
|
|
|
211 |
################################################################################
|
|
|
212 |
# Read/Write: Set control mode. GUI screen will contain strings representing
|
|
|
213 |
# the values on the interval [0, 22]. These values correspond to states in mbbi
|
|
|
214 |
# records $(IOC):$(NAME)-CTRL-MODE-1,2_
|
|
|
215 |
################################################################################
|
|
|
216 |
record(ao, "$(IOC):$(NAME)-SET-CTRL-MODE")
|
|
|
217 |
{
|
|
|
218 |
field(DESC,"Set the control mode")
|
|
|
219 |
field(DTYP, "stream")
|
|
|
220 |
field(OUT, "@devBronkhorst.proto writeChar(01,04) $(PORT)")
|
|
|
221 |
}
|
|
|
222 |
|
|
|
223 |
|
|
|
224 |
################################################################################
|
|
|
225 |
# Read/Write: Get/Set fluid number.
|
|
|
226 |
################################################################################
|
|
|
227 |
record(ai, "$(IOC):$(NAME)-GET-FLUID-NUM")
|
|
|
228 |
{
|
|
|
229 |
field(DESC, "Read fluid number")
|
|
|
230 |
field(DTYP, "stream")
|
|
|
231 |
field(SCAN, "$(SCAN1)")
|
|
|
232 |
field(PINI, "YES")
|
|
|
233 |
field(INP, "@devBronkhorst.proto readChar(01,10) $(PORT)")
|
|
|
234 |
|
|
|
235 |
}
|
|
|
236 |
|
|
|
237 |
record(ao, "$(IOC):$(NAME)-SET-FLUID-NUM")
|
|
|
238 |
{
|
|
|
239 |
field(DESC, "Set fluid number")
|
|
|
240 |
field(DTYP, "stream")
|
|
|
241 |
field(SCAN, "$(SCAN1)")
|
|
|
242 |
field(OUT, "@devBronkhorst.proto writeChar(01,10) $(PORT)")
|
|
|
243 |
}
|
|
|
244 |
|
|
|
245 |
################################################################################
|
|
|
246 |
# Read: Read sensor type
|
|
|
247 |
################################################################################
|
|
|
248 |
record(mbbi, "$(IOC):$(NAME)-GET-SENSOR-TYPE")
|
|
|
249 |
{
|
|
|
250 |
field(DESC,"Read sensor type")
|
|
|
251 |
field(DTYP, "stream")
|
|
|
252 |
field(SCAN, "$(SCAN1)")
|
|
|
253 |
field(INP, "@devBronkhorst.proto readChar(01,0E) $(PORT)")
|
|
|
254 |
field(ZRVL, "0")
|
|
|
255 |
field(ONVL, "1")
|
|
|
256 |
field(TWVL, "2")
|
|
|
257 |
field(THVL, "3")
|
|
|
258 |
field(FRVL, "4")
|
|
|
259 |
field(FVVL, "128")
|
|
|
260 |
field(SXVL, "129")
|
|
|
261 |
field(SVVL, "130")
|
|
|
262 |
field(EIVL, "131")
|
|
|
263 |
field(NIVL, "132")
|
|
|
264 |
field(ZRST, "Pressure controller")
|
|
|
265 |
field(ONST, "Liquid volume controller")
|
|
|
266 |
field(TWST, "Liquid/gas controller")
|
|
|
267 |
field(THST, "Gas volume controller")
|
|
|
268 |
field(FRST, "Other controller")
|
|
|
269 |
field(FVST, "Pressure sensor")
|
|
|
270 |
field(SXST, "Liquid volume sensor")
|
|
|
271 |
field(SVST, "Liquid/gas mass sensor")
|
|
|
272 |
field(EIST, "Gas volume sensor")
|
|
|
273 |
field(NIST, "Other sensor")
|
|
|
274 |
field(PINI, "YES")
|
|
|
275 |
}
|
|
|
276 |
|
|
|
277 |
|
|
|
278 |
################################################################################
|
|
|
279 |
# Read: Get readout unit
|
|
|
280 |
################################################################################
|
|
|
281 |
record(mbbi, "$(IOC):$(NAME)-GET-CAP-UNIT-IDX")
|
|
|
282 |
{
|
|
|
283 |
field(DESC, "Capacity unit index")
|
|
|
284 |
field(DTYP, "stream")
|
|
|
285 |
field(SCAN, "$(SCAN1)")
|
|
|
286 |
field(INP, "@devBronkhorst.proto readChar(01,0F) $(PORT)")
|
|
|
287 |
field(ZRST, "ln/min")
|
|
|
288 |
field(ONST, "mln/h")
|
|
|
289 |
field(TWST, "mln/min")
|
|
|
290 |
field(THST, "ln/h")
|
|
|
291 |
field(FRST, "m3n/h")
|
|
|
292 |
field(FFST, "mls/min")
|
|
|
293 |
field(SXST, "mls/h")
|
|
|
294 |
field(SVST, "ls/min")
|
|
|
295 |
field(EIST, "ls/h")
|
|
|
296 |
field(NIST, "m3s/h")
|
|
|
297 |
field(PINI, "YES")
|
|
|
298 |
}
|
|
|
299 |
|
|
|
300 |
################################################################################
|
|
|
301 |
# Read: Valve will go into the safe state if buss communication is lost and
|
|
|
302 |
# control mode is in BUS/RS232 state or if initreset = 73 or if control mode
|
|
|
303 |
# is 22.
|
|
|
304 |
################################################################################
|
|
|
305 |
record(mbbi, "$(IOC):$(NAME)-GET-VALVE-STATE")
|
|
|
306 |
{
|
|
|
307 |
field(DESC, "Capacity unit index")
|
|
|
308 |
field(DTYP, "stream")
|
|
|
309 |
field(SCAN, "$(SCAN1)")
|
|
|
310 |
field(INP, "@devBronkhorst.proto readChar(72,1A) $(PORT)")
|
|
|
311 |
field(ZRST, "Deactivate")
|
|
|
312 |
field(ONST, "Activate")
|
|
|
313 |
field(TWST, "Close")
|
|
|
314 |
field(THST, "Open")
|
|
|
315 |
field(FRST, "Current position")
|
|
|
316 |
field(FFST, "Safe Value")
|
|
|
317 |
field(PINI, "YES")
|
|
|
318 |
}
|
|
|
319 |
|
|
|
320 |
record(mbbo, "$(IOC):$(NAME)-SET-VALVE-STATE")
|
|
|
321 |
{
|
|
|
322 |
field(DESC, "Capacity unit index")
|
|
|
323 |
field(DTYP, "stream")
|
|
|
324 |
field(SCAN, "$(SCAN1)")
|
|
|
325 |
field(OUT, "@devBronkhorst.proto writeChar(72,1A) $(PORT)")
|
|
|
326 |
field(ZRST, "Deactivate")
|
|
|
327 |
field(ONST, "Activate")
|
|
|
328 |
field(TWST, "Close")
|
|
|
329 |
field(THST, "Open")
|
|
|
330 |
field(FRST, "Current position")
|
|
|
331 |
field(FFST, "Safe Value")
|
|
|
332 |
field(FLNK, "$(IOC):$(NAME)-GET-VALVE-STATE")
|
|
|
333 |
}
|
|
|
334 |
|
|
|
335 |
################################################################################
|
|
|
336 |
# Read: Alarm info. mbbiDirect record checks which flags are set and then
|
|
|
337 |
# starts (forward links) the process chain of bi records representing the value
|
|
|
338 |
# of each alarm state.
|
|
|
339 |
################################################################################
|
|
|
340 |
record(mbbiDirect, "$(IOC):$(NAME)-GET-ALARM-INFO")
|
|
|
341 |
{
|
|
|
342 |
field(DESC, "Read alarm flags")
|
|
|
343 |
field(DTYP, "stream")
|
|
|
344 |
field(INP, "@devBronkhorst.proto readChar(01,14) $(PORT)")
|
|
|
345 |
field(SCAN, "$(SCAN2)")
|
|
|
346 |
field(PINI, "YES")
|
|
|
347 |
field(FLNK, "$(IOC):$(NAME)-ERROR-MSG-NUM")
|
|
|
348 |
}
|
|
|
349 |
|
|
|
350 |
################################################################################
|
|
|
351 |
# Read: Alarm mode
|
|
|
352 |
################################################################################
|
|
|
353 |
record(mbbi, "$(IOC):$(NAME)-GET-ALARM-MODE")
|
|
|
354 |
{
|
|
|
355 |
field(DESC, "Read alarm mode")
|
|
|
356 |
field(DTYP, "stream")
|
|
|
357 |
field(INP, "@devBronkhorst.proto readChar(61,03) $(PORT)")
|
|
|
358 |
field(SCAN, "$(SCAN1)")
|
|
|
359 |
field(ZRST, "Off")
|
|
|
360 |
field(ONST, "Absolute Limits")
|
|
|
361 |
field(TWST, "Setpoint Limits")
|
|
|
362 |
field(THST, "Power up")
|
|
|
363 |
field(PINI, "YES")
|
|
|
364 |
}
|
|
|
365 |
|
|
|
366 |
################################################################################
|
|
|
367 |
# Write; Set Alarm mode
|
|
|
368 |
################################################################################
|
|
|
369 |
record(mbbo, "$(IOC):$(NAME)-SET-ALARM-MODE")
|
|
|
370 |
{
|
|
|
371 |
field(DESC, "Set alarm mode")
|
|
|
372 |
field(DTYP, "stream")
|
|
|
373 |
field(OUT, "@devBronkhorst.proto writeChar(61,03) $(PORT)")
|
|
|
374 |
field(SCAN, "$(SCAN1)")
|
|
|
375 |
field(ZRST, "Off")
|
|
|
376 |
field(ONST, "Absolute Limits")
|
|
|
377 |
field(TWST, "Setpoint Limits")
|
|
|
378 |
field(THST, "Power up")
|
|
|
379 |
field(FLNK, "$(IOC):$(NAME)-GET-ALARM-MODE")
|
|
|
380 |
}
|
|
|
381 |
################################################################################
|
|
|
382 |
# Read-Write; Get/Set maximum alarm limit. User specifies percentage which is
|
|
|
383 |
# converted to interval [0, 32000]
|
|
|
384 |
################################################################################
|
|
|
385 |
record(calc, "$(IOC):$(NAME)-GET-ALM-MAX-LIM")
|
|
|
386 |
{
|
|
|
387 |
field(DESC, "Get alarm maximum limit in %")
|
|
|
388 |
field(INPA, "$(IOC):$(NAME)-GET-ALM-MAX-LIM_")
|
|
|
389 |
field(SCAN, "$(SCAN1)")
|
|
|
390 |
field(PREC, "1")
|
|
|
391 |
field(CALC, "A*100/32000")
|
|
|
392 |
field(EGU, "%")
|
|
|
393 |
}
|
|
|
394 |
|
|
|
395 |
record(ai, "$(IOC):$(NAME)-GET-ALM-MAX-LIM_")
|
|
|
396 |
{
|
|
|
397 |
field(DESC, "Get alarm maximum limit in raw")
|
|
|
398 |
field(DTYP, "stream")
|
|
|
399 |
field(INP, "@devBronkhorst.proto readInt(61,21) $(PORT)")
|
|
|
400 |
field(SCAN, "$(SCAN1)")
|
|
|
401 |
field(PINI, "YES")
|
|
|
402 |
field(FLNK, "$(IOC):$(NAME)-GET-ALM-MAX-LIM")
|
|
|
403 |
}
|
|
|
404 |
|
|
|
405 |
record(ai, "$(IOC):$(NAME)-SET-ALM-MAX-LIM")
|
|
|
406 |
{
|
|
|
407 |
field(DESC, "Set alarm maximum limit in %")
|
|
|
408 |
field(FLNK, "$(IOC):$(NAME)-SET-ALM-MAX-LIM_")
|
|
|
409 |
field(EGU, "%")
|
|
|
410 |
field(PREC, "1")
|
|
|
411 |
}
|
|
|
412 |
|
|
|
413 |
record(calcout, "$(IOC):$(NAME)-SET-ALM-MAX-LIM_")
|
|
|
414 |
{
|
|
|
415 |
field(DESC, "Set alarm maximum limit in raw")
|
|
|
416 |
field(DTYP, "stream")
|
|
|
417 |
field(INPA, "$(IOC):$(NAME)-SET-ALM-MAX-LIM")
|
|
|
418 |
field(CALC, "A*32000/100")
|
|
|
419 |
field(OUT, "@devBronkhorst.proto writeInt(61,21) $(PORT)")
|
|
|
420 |
field(FLNK, "$(IOC):$(NAME)-GET-ALM-MAX-LIM_")
|
|
|
421 |
}
|
|
|
422 |
|
|
|
423 |
record(calcout, "$(IOC):$(NAME)-SET-ALM-MAX-LIM-INIT_"){
|
|
|
424 |
field(INPA, "$(IOC):$(NAME)-SET-ALM-MAX-LIMT_")
|
|
|
425 |
field(CALC, "A*100/32000")
|
|
|
426 |
field(OUT, "$(IOC):$(NAME)-SET-ALM-MAX-LIM")
|
|
|
427 |
field(PINI, "YES")
|
|
|
428 |
field(FLNK, "$(IOC):$(NAME)-SET-ALM-MAX-LIM")
|
|
|
429 |
|
|
|
430 |
}
|
|
|
431 |
|
|
|
432 |
################################################################################
|
|
|
433 |
# Read-Write; Get/Set minimum alarm limit. User specifies percentage which is
|
|
|
434 |
# converted to interval [0, 32000]
|
|
|
435 |
################################################################################
|
|
|
436 |
record(calc, "$(IOC):$(NAME)-GET-ALM-MIN-LIM")
|
|
|
437 |
{
|
|
|
438 |
field(DESC, "Get alarm minimum limit in %")
|
|
|
439 |
field(INPA, "$(IOC):$(NAME)-GET-ALM-MIN-LIM_")
|
|
|
440 |
field(SCAN, "$(SCAN1)")
|
|
|
441 |
field(PREC, "1")
|
|
|
442 |
field(CALC, "A*100/32000")
|
|
|
443 |
}
|
|
|
444 |
|
|
|
445 |
record(ai, "$(IOC):$(NAME)-GET-ALM-MIN-LIM_")
|
|
|
446 |
{
|
|
|
447 |
field(DESC, "Get alarm minimum limit in raw")
|
|
|
448 |
field(DTYP, "stream")
|
|
|
449 |
field(INP, "@devBronkhorst.proto readInt(61,22) $(PORT)")
|
|
|
450 |
field(SCAN, "$(SCAN1)")
|
|
|
451 |
field(PINI, "YES")
|
|
|
452 |
field(FLNK, "$(IOC):$(NAME)-GET-ALM-MIN-LIM")
|
|
|
453 |
}
|
|
|
454 |
|
|
|
455 |
record(ai, "$(IOC):$(NAME)-SET-ALM-MIN-LIM")
|
|
|
456 |
{
|
|
|
457 |
field(DESC, "Set alarm minimum limit in %")
|
|
|
458 |
field(EGU, "%")
|
|
|
459 |
field(PREC, "1")
|
|
|
460 |
field(FLNK, "$(IOC):$(NAME)-SET-ALM-MIN-LIM_")
|
|
|
461 |
}
|
|
|
462 |
|
|
|
463 |
record(calcout, "$(IOC):$(NAME)-SET-ALM-MIN-LIM_")
|
|
|
464 |
{
|
|
|
465 |
field(DESC, "Set alarm minimum limit in raw")
|
|
|
466 |
field(DTYP, "stream")
|
|
|
467 |
field(INPA, "$(IOC):$(NAME)-SET-ALM-MIN-LIM")
|
|
|
468 |
field(CALC, "A*32000/100")
|
|
|
469 |
field(OUT, "@devBronkhorst.proto writeInt(61,22) $(PORT)")
|
|
|
470 |
field(FLNK, "$(IOC):$(NAME)-GET-ALM-MIN-LIM_")
|
|
|
471 |
}
|
|
|
472 |
|
|
|
473 |
record(calcout, "$(IOC):$(NAME)-SET-ALM-MIN-LIM-INIT_"){
|
|
|
474 |
field(INPA, "$(IOC):$(NAME)-SET-ALM-MIN-LIMT_")
|
|
|
475 |
field(CALC, "A*100/32000")
|
|
|
476 |
field(OUT, "$(IOC):$(NAME)-SET-ALM-MIN-LIM")
|
|
|
477 |
field(PINI, "YES")
|
|
|
478 |
field(FLNK, "$(IOC):$(NAME)-SET-ALM-MIN-LIM")
|
|
|
479 |
|
|
|
480 |
}
|
|
|
481 |
|
|
|
482 |
|
|
|
483 |
################################################################################
|
|
|
484 |
# Read-Write; Get/Set alarm setpoint mode. If device goes into an alarm state,
|
|
|
485 |
# a new setpoint (stored in the record $(IOC):$(NAME)-GET/SET-ALM-NEW-SP) will be set,
|
|
|
486 |
# but only if device ($(IOC):$(NAME)-GET/SET-ALM-SP-MODE) is in state 1.
|
|
|
487 |
################################################################################
|
|
|
488 |
record(bi, "$(IOC):$(NAME)-GET-ALM-SP-MODE")
|
|
|
489 |
{
|
|
|
490 |
field(DESC, "Get alarm setpoint mode")
|
|
|
491 |
field(DTYP, "stream")
|
|
|
492 |
field(SCAN, "$(SCAN1)")
|
|
|
493 |
field(ZNAM, "NO")
|
|
|
494 |
field(ONAM, "YES")
|
|
|
495 |
field(PINI, "YES")
|
|
|
496 |
field(INP, "@devBronkhorst.proto readChar(61,05) $(PORT)")
|
|
|
497 |
}
|
|
|
498 |
|
|
|
499 |
record(bo, "$(IOC):$(NAME)-SET-ALM-SP-MODE")
|
|
|
500 |
{
|
|
|
501 |
field(DESC, "Set alarm setpoint mode")
|
|
|
502 |
field(DTYP, "stream")
|
|
|
503 |
field(SCAN, "$(SCAN1)")
|
|
|
504 |
field(ZNAM, "NO")
|
|
|
505 |
field(ONAM, "YES")
|
|
|
506 |
field(OUT, "@devBronkhorst.proto writeChar(61,05) $(PORT)")
|
|
|
507 |
field(FLNK, "$(IOC):$(NAME)-GET-ALM-SP-MODE")
|
|
|
508 |
}
|
|
|
509 |
|
|
|
510 |
record(ai, "$(IOC):$(NAME)-GET-ALM-NEW-SP_")
|
|
|
511 |
{
|
|
|
512 |
field(DESC, "Read alarm setpoint")
|
|
|
513 |
field(DTYP, "stream")
|
|
|
514 |
field(INP, "@devBronkhorst.proto readInt(61,26) $(PORT)")
|
|
|
515 |
field(PINI, "YES")
|
|
|
516 |
field(FLNK, "$(IOC):$(NAME)-GET-ALM-NEW-SP")
|
|
|
517 |
}
|
|
|
518 |
|
|
|
519 |
record(calc, "$(IOC):$(NAME)-GET-ALM-NEW-SP")
|
|
|
520 |
{
|
|
|
521 |
field(DESC, "Alarm setpoint to percentage")
|
|
|
522 |
field(INPA, "$(IOC):$(NAME)-GET-ALM-NEW-SP_")
|
|
|
523 |
field(EGU, "%")
|
|
|
524 |
field(PREC, "1")
|
|
|
525 |
field(CALC, "A*100/32000")
|
|
|
526 |
}
|
|
|
527 |
|
|
|
528 |
record(ao, "$(IOC):$(NAME)-SET-ALM-NEW-SP")
|
|
|
529 |
{
|
|
|
530 |
field(DESC, "Alarm setpoint in percentage")
|
|
|
531 |
field(EGU, "%")
|
|
|
532 |
field(PREC, "1")
|
|
|
533 |
field(FLNK, "$(IOC):$(NAME)-SET-ALM-NEW-SP_")
|
|
|
534 |
}
|
|
|
535 |
|
|
|
536 |
record(calcout, "$(IOC):$(NAME)-SET-ALM-NEW-SP_")
|
|
|
537 |
{
|
|
|
538 |
field(DESC, "Write alarm setpoint")
|
|
|
539 |
field(INPA, "$(IOC):$(NAME)-SET-ALM-NEW-SP")
|
|
|
540 |
field(DTYP, "stream")
|
|
|
541 |
field(CALC, "A*32000/100")
|
|
|
542 |
field(OUT, "@devBronkhorst.proto writeInt(61,26) $(PORT)")
|
|
|
543 |
field(FLNK, "$(IOC):$(NAME)-GET-ALM-NEW-SP_")
|
|
|
544 |
}
|
|
|
545 |
|
|
|
546 |
record(calcout, "$(IOC):$(NAME)-SET-ALM-NEW-SP-INIT_"){
|
|
|
547 |
field(INPA, "$(IOC):$(NAME)-SET-ALM-NEW-SP_")
|
|
|
548 |
field(CALC, "A*100/32000")
|
|
|
549 |
field(OUT, "$(IOC):$(NAME)-SET-ALM-NEW-SP")
|
|
|
550 |
field(PINI, "YES")
|
|
|
551 |
field(FLNK, "$(IOC):$(NAME)-SET-ALM-NEW-SP")
|
|
|
552 |
|
|
|
553 |
}
|
|
|
554 |
|
|
|
555 |
|
|
|
556 |
################################################################################
|
|
|
557 |
# Read-Write; Alarm delay time seconds. Alarm action will be delayed when alarm
|
|
|
558 |
# limit has been exceeded. Automatic reset will be delayed when sensor signal
|
|
|
559 |
# reaches safe level again.
|
|
|
560 |
################################################################################
|
|
|
561 |
record(ai, "$(IOC):$(NAME)-GET-ALM-DELAY")
|
|
|
562 |
{
|
|
|
563 |
field(DESC, "Get alarm delay")
|
|
|
564 |
field(DTYP, "stream")
|
|
|
565 |
field(SCAN, "$(SCAN1)")
|
|
|
566 |
field(EGU, "s")
|
|
|
567 |
field(PINI, "YES")
|
|
|
568 |
field(INP, "@devBronkhorst.proto readChar(61,07) $(PORT)")
|
|
|
569 |
}
|
|
|
570 |
|
|
|
571 |
record(ao, "$(IOC):$(NAME)-SET-ALM-DELAY")
|
|
|
572 |
{
|
|
|
573 |
field(DESC, "Get alarm delay")
|
|
|
574 |
field(DTYP, "stream")
|
|
|
575 |
field(EGU, "s")
|
|
|
576 |
field(OUT, "@devBronkhorst.proto writeChar(61,07) $(PORT)")
|
|
|
577 |
field(FLNK, "$(IOC):$(NAME)-GET-ALM-DELAY")
|
|
|
578 |
}
|
|
|
579 |
|
|
|
580 |
################################################################################
|
|
|
581 |
# Read-Write; Enable reset alarm for different reset triggers.
|
|
|
582 |
################################################################################
|
|
|
583 |
record(mbbi, "$(IOC):$(NAME)-GET-RESET-ALM-MODE")
|
|
|
584 |
{
|
|
|
585 |
field(DESC, "Get reset alarm mode")
|
|
|
586 |
field(DTYP, "stream")
|
|
|
587 |
field(SCAN, "$(SCAN1)")
|
|
|
588 |
field(INP, "@devBronkhorst.proto readChar(61,09) $(PORT)")
|
|
|
589 |
field(ZRST, "OFF")
|
|
|
590 |
field(ONST, "Switch")
|
|
|
591 |
field(TWST, "External")
|
|
|
592 |
field(THST, "External,Switch")
|
|
|
593 |
field(FRST, "RS232")
|
|
|
594 |
field(FVST, "RS232,Switch")
|
|
|
595 |
field(SXST, "RS232,Ext")
|
|
|
596 |
field(SVST, "RS232,Ext,Switch")
|
|
|
597 |
field(EIST, "Auto")
|
|
|
598 |
field(NIST, "Auto,Switch")
|
|
|
599 |
field(TEST, "Auto,Ext")
|
|
|
600 |
field(ELST, "Auto,Ext,Switch")
|
|
|
601 |
field(TVST, "Auto,RS232")
|
|
|
602 |
field(TTST, "Auto,RS232,Switch")
|
|
|
603 |
field(FTST, "Auto,RS232,Ext")
|
|
|
604 |
field(FFST, "Auto,RS232,Ext,Switch")
|
|
|
605 |
#field(PINI, "YES")
|
|
|
606 |
}
|
|
|
607 |
|
|
|
608 |
record(mbboDirect, "$(IOC):$(NAME)-SET-RESET-ALM-MODE")
|
|
|
609 |
{
|
|
|
610 |
field(DESC, "Set alarm reset mode")
|
|
|
611 |
field(DTYP, "stream")
|
|
|
612 |
field(SCAN, "$(SCAN1)")
|
|
|
613 |
field(B0, "1")
|
|
|
614 |
field(B2, "1")
|
|
|
615 |
field(OUT, "@devBronkhorst.proto writeChar(61,09) $(PORT)")
|
|
|
616 |
# field(ZRST, "OFF")
|
|
|
617 |
# field(ONST, "Switch")
|
|
|
618 |
# field(TWST, "External")
|
|
|
619 |
# field(THST, "Switch,External")
|
|
|
620 |
# field(FRST, "RS232")
|
|
|
621 |
# field(FVST, "RS232,Switch")
|
|
|
622 |
# field(SXST, "RS232,Ext")
|
|
|
623 |
# field(SVST, "RS232,Ext,Switch")
|
|
|
624 |
# field(EIST, "Auto")
|
|
|
625 |
# field(NIST, "Auto,Switch")
|
|
|
626 |
# field(TEST, "Auto,Ext")
|
|
|
627 |
# field(ELST, "Auto,Ext,Switch")
|
|
|
628 |
# field(TVST, "Auto,RS232")
|
|
|
629 |
# field(TTST, "Auto,RS232,Switch")
|
|
|
630 |
# field(FTST, "Auto,RS232,Ext")
|
|
|
631 |
# field(FFST, "Auto,RS232,Ext,Switch")
|
|
|
632 |
field(PINI, "YES")
|
|
|
633 |
field(FLNK, "$(IOC):$(NAME)-GET-RESET-ALM-MODE")
|
|
|
634 |
}
|
|
|
635 |
|
|
|
636 |
record(bo, "$(IOC):$(NAME)-TOGGLE-RESET-SWITCH")
|
|
|
637 |
{
|
|
|
638 |
field(DESC, "")
|
|
|
639 |
field(OUT, "$(IOC):$(NAME)-SET-RESET-ALM-MODE.B0")
|
|
|
640 |
field(FLNK, "$(IOC):$(NAME)-SET-RESET-ALM-MODE")
|
|
|
641 |
|
|
|
642 |
}
|
|
|
643 |
|
|
|
644 |
record(bo, "$(IOC):$(NAME)-TOGGLE-RESET-EXT")
|
|
|
645 |
{
|
|
|
646 |
field(DESC, "")
|
|
|
647 |
field(OUT, "$(IOC):$(NAME)-SET-RESET-ALM-MODE.B1")
|
|
|
648 |
field(FLNK, "$(IOC):$(NAME)-SET-RESET-ALM-MODE")
|
|
|
649 |
|
|
|
650 |
}
|
|
|
651 |
|
|
|
652 |
record(bo, "$(IOC):$(NAME)-TOGGLE-RESET-RS232")
|
|
|
653 |
{
|
|
|
654 |
field(DESC, "")
|
|
|
655 |
field(OUT, "$(IOC):$(NAME)-SET-RESET-ALM-MODE.B2")
|
|
|
656 |
field(FLNK, "$(IOC):$(NAME)-SET-RESET-ALM-MODE")
|
|
|
657 |
|
|
|
658 |
}
|
|
|
659 |
|
|
|
660 |
record(bo, "$(IOC):$(NAME)-TOGGLE-RESET-AUTO")
|
|
|
661 |
{
|
|
|
662 |
field(DESC, "")
|
|
|
663 |
field(OUT, "$(IOC):$(NAME)-SET-RESET-ALM-MODE.B3")
|
|
|
664 |
field(FLNK, "$(IOC):$(NAME)-SET-RESET-ALM-MODE")
|
|
|
665 |
|
|
|
666 |
}
|
|
|
667 |
|
|
|
668 |
################################################################################
|
|
|
669 |
# Read-Write; Counter mode.
|
|
|
670 |
################################################################################
|
|
|
671 |
record(mbbi, "$(IOC):$(NAME)-GET-CNT-MODE")
|
|
|
672 |
{
|
|
|
673 |
field(DESC, "Get counter mode")
|
|
|
674 |
field(DTYP, "stream")
|
|
|
675 |
field(SCAN, "$(SCAN1)")
|
|
|
676 |
field(INP, "@devBronkhorst.proto readChar(68,08) $(PORT)")
|
|
|
677 |
field(ZRST, "Off")
|
|
|
678 |
field(ONST, "Continuous")
|
|
|
679 |
field(TWST, "To limit")
|
|
|
680 |
field(PINI, "YES")
|
|
|
681 |
}
|
|
|
682 |
|
|
|
683 |
record(mbbo, "$(IOC):$(NAME)-SET-CNT-MODE")
|
|
|
684 |
{
|
|
|
685 |
field(DESC, "Set counter mode")
|
|
|
686 |
field(DTYP, "stream")
|
|
|
687 |
field(SCAN, "$(SCAN1)")
|
|
|
688 |
field(OUT, "@devBronkhorst.proto writeChar(68,08) $(PORT)")
|
|
|
689 |
field(ZRST, "Off")
|
|
|
690 |
field(ONST, "Continuous")
|
|
|
691 |
field(TWST, "To limit")
|
|
|
692 |
field(FLNK, "$(IOC):$(NAME)-GET-CNT-MODE")
|
|
|
693 |
}
|
|
|
694 |
|
|
|
695 |
################################################################################
|
|
|
696 |
# Read-Write; Counter setpoint mode. 0 - No setpoint change when limit is
|
|
|
697 |
# reached. 1 - setpoint change when limit is reached
|
|
|
698 |
################################################################################
|
|
|
699 |
record(bi, "$(IOC):$(NAME)-GET-CNT-SP-MODE")
|
|
|
700 |
{
|
|
|
701 |
field(DESC, "Get counter mode")
|
|
|
702 |
field(DTYP, "stream")
|
|
|
703 |
field(SCAN, "$(SCAN1)")
|
|
|
704 |
field(INP, "@devBronkhorst.proto readChar(68,05) $(PORT)")
|
|
|
705 |
field(ZNAM, "NO")
|
|
|
706 |
field(ONAM, "YES")
|
|
|
707 |
field(PINI, "YES")
|
|
|
708 |
}
|
|
|
709 |
|
|
|
710 |
record(bo, "$(IOC):$(NAME)-SET-CNT-SP-MODE")
|
|
|
711 |
{
|
|
|
712 |
field(DESC, "Set counter mode")
|
|
|
713 |
field(DTYP, "stream")
|
|
|
714 |
field(SCAN, "$(SCAN1)")
|
|
|
715 |
field(OUT, "@devBronkhorst.proto writeChar(68,05) $(PORT)")
|
|
|
716 |
field(ZNAM, "NO")
|
|
|
717 |
field(ONAM, "YES")
|
|
|
718 |
field(FLNK, "$(IOC):$(NAME)-GET-CNT-SP-MODE")
|
|
|
719 |
}
|
|
|
720 |
|
|
|
721 |
################################################################################
|
|
|
722 |
# Read-Write; Get/Set new counter setpoint which will apply f GET-CNT-SP-MODE is
|
|
|
723 |
# YES when limit is reached.
|
|
|
724 |
################################################################################
|
|
|
725 |
record(ai, "$(IOC):$(NAME)-GET-CNT-NEW-SP_")
|
|
|
726 |
{
|
|
|
727 |
field(DESC, "Read counter new setpoint")
|
|
|
728 |
field(DTYP, "stream")
|
|
|
729 |
field(INP, "@devBronkhorst.proto readInt(68,26) $(PORT)")
|
|
|
730 |
field(PINI, "YES")
|
|
|
731 |
field(FLNK, "$(IOC):$(NAME)-GET-CNT-NEW-SP")
|
|
|
732 |
}
|
|
|
733 |
|
|
|
734 |
record(calc, "$(IOC):$(NAME)-GET-CNT-NEW-SP")
|
|
|
735 |
{
|
|
|
736 |
field(DESC, "Counter new setpoint to percentage")
|
|
|
737 |
field(INPA, "$(IOC):$(NAME)-GET-CNT-NEW-SP_")
|
|
|
738 |
field(EGU, "%")
|
|
|
739 |
field(PREC, "1")
|
|
|
740 |
field(CALC, "A*100/32000")
|
|
|
741 |
}
|
|
|
742 |
|
|
|
743 |
record(ao, "$(IOC):$(NAME)-SET-CNT-NEW-SP")
|
|
|
744 |
{
|
|
|
745 |
field(DESC, "Counter new setpoint in percentage")
|
|
|
746 |
field(EGU, "%")
|
|
|
747 |
field(PREC, "1")
|
|
|
748 |
field(FLNK, "$(IOC):$(NAME)-SET-CNT-NEW-SP_")
|
|
|
749 |
}
|
|
|
750 |
|
|
|
751 |
record(calcout, "$(IOC):$(NAME)-SET-CNT-NEW-SP_")
|
|
|
752 |
{
|
|
|
753 |
field(DESC, "Write counter new setpoint")
|
|
|
754 |
field(INPA, "$(IOC):$(NAME)-SET-CNT-NEW-SP")
|
|
|
755 |
field(DTYP, "stream")
|
|
|
756 |
field(CALC, "A*32000/100")
|
|
|
757 |
field(OUT, "@devBronkhorst.proto writeInt(68,26) $(PORT)")
|
|
|
758 |
field(FLNK, "$(IOC):$(NAME)-GET-CNT-NEW-SP_")
|
|
|
759 |
}
|
|
|
760 |
|
|
|
761 |
record(calcout, "$(IOC):$(NAME)-SET-CNT-NEW-SP-INIT_"){
|
|
|
762 |
field(INPA, "$(IOC):$(NAME)-SET-CNT-NEW-SP_")
|
|
|
763 |
field(CALC, "A*100/32000")
|
|
|
764 |
field(OUT, "$(IOC):$(NAME)-SET-CNT-NEW-SP")
|
|
|
765 |
field(PINI, "YES")
|
|
|
766 |
field(FLNK, "$(IOC):$(NAME)-SET-CNT-NEW-SP")
|
|
|
767 |
|
|
|
768 |
}
|
|
|
769 |
|
|
|
770 |
################################################################################
|
|
|
771 |
# Read-Write; Counter unit
|
|
|
772 |
################################################################################
|
|
|
773 |
record(mbbi, "$(IOC):$(NAME)-GET-CNT-UNIT")
|
|
|
774 |
{
|
|
|
775 |
field(DESC, "Read counter unit")
|
|
|
776 |
field(DTYP, "stream")
|
|
|
777 |
field(INP, "@devBronkhorst.proto readChar(68,02) $(PORT)")
|
|
|
778 |
field(ZRST, "ln")
|
|
|
779 |
field(ONST, "mm3n")
|
|
|
780 |
field(TWST, "mln")
|
|
|
781 |
field(THST, "cm3n")
|
|
|
782 |
field(FRST, "uln")
|
|
|
783 |
field(FVST, "dm3n")
|
|
|
784 |
field(SXST, "m3n")
|
|
|
785 |
field(SVST, "uls")
|
|
|
786 |
field(EIST, "mm3s")
|
|
|
787 |
field(NIST, "mls")
|
|
|
788 |
field(TEST, "cm3s")
|
|
|
789 |
field(ELST, "ls")
|
|
|
790 |
field(TVST, "dm3s")
|
|
|
791 |
field(TTST, "m3s")
|
|
|
792 |
# field(PINI, "YES")
|
|
|
793 |
}
|
|
|
794 |
|
|
|
795 |
record(mbbo, "$(IOC):$(NAME)-SET-CNT-UNIT")
|
|
|
796 |
{
|
|
|
797 |
field(DESC, "Read counter unit")
|
|
|
798 |
field(DTYP, "stream")
|
|
|
799 |
field(OUT, "@devBronkhorst.proto writeChar(68,02) $(PORT)")
|
|
|
800 |
field(VAL, "0")
|
|
|
801 |
field(ZRST, "ln")
|
|
|
802 |
field(ONST, "mm3n")
|
|
|
803 |
field(TWST, "mln")
|
|
|
804 |
field(THST, "cm3n")
|
|
|
805 |
field(FRST, "uln")
|
|
|
806 |
field(FVST, "dm3n")
|
|
|
807 |
field(SXST, "m3n")
|
|
|
808 |
field(SVST, "uls")
|
|
|
809 |
field(EIST, "mm3s")
|
|
|
810 |
field(NIST, "mls")
|
|
|
811 |
field(TEST, "cm3s")
|
|
|
812 |
field(ELST, "ls")
|
|
|
813 |
field(TVST, "dm3s")
|
|
|
814 |
field(TTST, "m3s")
|
|
|
815 |
field(PINI, "YES")
|
|
|
816 |
field(FLNK, "$(IOC):$(NAME)-GET-CNT-UNIT")
|
|
|
817 |
}
|
|
|
818 |
|
|
|
819 |
|
|
|
820 |
################################################################################
|
|
|
821 |
# Read-Write; Enable reset counter for different reset triggers.
|
|
|
822 |
################################################################################
|
|
|
823 |
record(mbbi, "$(IOC):$(NAME)-GET-RESET-CNT-MODE")
|
|
|
824 |
{
|
|
|
825 |
field(DESC, "Get reset alarm mode")
|
|
|
826 |
field(DTYP, "stream")
|
|
|
827 |
field(SCAN, "$(SCAN1)")
|
|
|
828 |
field(INP, "@devBronkhorst.proto readChar(68,09) $(PORT)")
|
|
|
829 |
field(ZRST, "OFF")
|
|
|
830 |
field(ONST, "Switch")
|
|
|
831 |
field(TWST, "External")
|
|
|
832 |
field(THST, "Switch,External")
|
|
|
833 |
field(FRST, "RS232")
|
|
|
834 |
field(FVST, "RS232,Switch")
|
|
|
835 |
field(SXST, "RS232,Ext")
|
|
|
836 |
field(SVST, "RS232,Ext,Switch")
|
|
|
837 |
field(EIST, "Auto")
|
|
|
838 |
field(NIST, "Auto,Switch")
|
|
|
839 |
field(TEST, "Auto,Ext")
|
|
|
840 |
field(ELST, "Auto,Ext,Switch")
|
|
|
841 |
field(TVST, "Auto,RS232")
|
|
|
842 |
field(TTST, "Auto,RS232,Switch")
|
|
|
843 |
field(FTST, "Auto,RS232,Ext")
|
|
|
844 |
field(FFST, "Auto,RS232,Ext,Switch")
|
|
|
845 |
}
|
|
|
846 |
|
|
|
847 |
record(mbboDirect, "$(IOC):$(NAME)-SET-RESET-CNT-MODE")
|
|
|
848 |
{
|
|
|
849 |
field(DESC, "Set alarm reset mode")
|
|
|
850 |
field(DTYP, "stream")
|
|
|
851 |
field(SCAN, "$(SCAN1)")
|
|
|
852 |
field(B0, "1")
|
|
|
853 |
field(B2, "1")
|
|
|
854 |
field(OUT, "@devBronkhorst.proto writeChar(68,09) $(PORT)")
|
|
|
855 |
# field(ZRST, "OFF")
|
|
|
856 |
# field(ONST, "Switch")
|
|
|
857 |
# field(TWST, "External")
|
|
|
858 |
# field(THST, "Switch,External")
|
|
|
859 |
# field(FRST, "RS232")
|
|
|
860 |
# field(FVST, "RS232,Switch")
|
|
|
861 |
# field(SXST, "RS232,Ext")
|
|
|
862 |
# field(SVST, "RS232,Ext,Switch")
|
|
|
863 |
# field(EIST, "Auto")
|
|
|
864 |
# field(NIST, "Auto,Switch")
|
|
|
865 |
# field(TEST, "Auto,Ext")
|
|
|
866 |
# field(ELST, "Auto,Ext;Switch")
|
|
|
867 |
# field(TVST, "Auto,RS232")
|
|
|
868 |
# field(TTST, "Auto,RS232,Switch")
|
|
|
869 |
# field(FTST, "Auto,RS232,Ext")
|
|
|
870 |
# field(FFST, "Auto,RS232,Ext,Switch")
|
|
|
871 |
field(PINI, "YES")
|
|
|
872 |
field(FLNK, "$(IOC):$(NAME)-GET-RESET-CNT-MODE")
|
|
|
873 |
}
|
|
|
874 |
|
|
|
875 |
record(bo, "$(IOC):$(NAME)-TOGGLE-RESET-CNT-SWITCH")
|
|
|
876 |
{
|
|
|
877 |
field(DESC, "")
|
|
|
878 |
field(OUT, "$(IOC):$(NAME)-SET-RESET-CNT-MODE.B0")
|
|
|
879 |
field(FLNK, "$(IOC):$(NAME)-SET-RESET-CNT-MODE")
|
|
|
880 |
}
|
|
|
881 |
|
|
|
882 |
record(bo, "$(IOC):$(NAME)-TOGGLE-RESET-CNT-EXT")
|
|
|
883 |
{
|
|
|
884 |
field(DESC, "")
|
|
|
885 |
field(OUT, "$(IOC):$(NAME)-SET-RESET-CNT-MODE.B1")
|
|
|
886 |
field(FLNK, "$(IOC):$(NAME)-SET-RESET-CNT-MODE")
|
|
|
887 |
}
|
|
|
888 |
|
|
|
889 |
record(bo, "$(IOC):$(NAME)-TOGGLE-RESET-CNT-RS232")
|
|
|
890 |
{
|
|
|
891 |
field(DESC, "")
|
|
|
892 |
field(OUT, "$(IOC):$(NAME)-SET-RESET-CNT-MODE.B2")
|
|
|
893 |
field(FLNK, "$(IOC):$(NAME)-SET-RESET-CNT-MODE")
|
|
|
894 |
}
|
|
|
895 |
|
|
|
896 |
record(bo, "$(IOC):$(NAME)-TOGGLE-RESET-CNT-AUTO")
|
|
|
897 |
{
|
|
|
898 |
field(DESC, "")
|
|
|
899 |
field(OUT, "$(IOC):$(NAME)-SET-RESET-CNT-MODE.B3")
|
|
|
900 |
field(FLNK, "$(IOC):$(NAME)-SET-RESET-CNT-MODE")
|
|
|
901 |
}
|
|
|
902 |
################################################################################
|
|
|
903 |
# Write. RESET
|
|
|
904 |
################################################################################
|
|
|
905 |
record(mbbo, "$(IOC):$(NAME)-RESET")
|
|
|
906 |
{
|
|
|
907 |
field(DESC, "Set alarm reset mode")
|
|
|
908 |
field(DTYP, "stream")
|
|
|
909 |
field(SCAN, "$(SCAN1)")
|
|
|
910 |
field(OUT, "@devBronkhorst.proto writeChar(73,08) $(PORT)")
|
|
|
911 |
field(ZRST, "NO RESET")
|
|
|
912 |
field(ONST, "Counter")
|
|
|
913 |
field(TWST, "Alarm")
|
|
|
914 |
field(THST, "Limit counter")
|
|
|
915 |
field(FRST, "Counter reset & OFF")
|
|
|
916 |
field(FVST, "Module")
|
|
|
917 |
field(SXST, "Alarm info error")
|
|
|
918 |
field(SVST, "Alarm info warning")
|
|
|
919 |
field(FLNK, "$(IOC):$(NAME)-GET-CNT-MODE")
|
|
|
920 |
|
|
|
921 |
}
|
|
|
922 |
|
|
|
923 |
################################################################################
|
|
|
924 |
################################################################################
|
|
|
925 |
#FLOAT PARAMETERS
|
|
|
926 |
################################################################################
|
|
|
927 |
################################################################################
|
|
|
928 |
################################################################################
|
|
|
929 |
# Read; Counter value
|
|
|
930 |
################################################################################
|
|
|
931 |
record(ai, "$(IOC):$(NAME)-GET-CNT")
|
|
|
932 |
{
|
|
|
933 |
field(DESC, "Read counter")
|
|
|
934 |
field(PREC, "3")
|
|
|
935 |
}
|
|
|
936 |
|
|
|
937 |
record(aSub, "$(IOC):$(NAME)-GET-CNT_")
|
|
|
938 |
{
|
|
|
939 |
field(DESC, "Interpret long as float")
|
|
|
940 |
field(INPA, "$(IOC):$(NAME)-GET-CNT__")
|
|
|
941 |
field(FTA, "LONG")
|
|
|
942 |
field(OUTA, "$(IOC):$(NAME)-GET-CNT")
|
|
|
943 |
field(FTVA, "FLOAT")
|
|
|
944 |
field(SNAM, "readFloat")
|
|
|
945 |
field(FLNK, "$(IOC):$(NAME)-GET-CNT")
|
|
|
946 |
}
|
|
|
947 |
|
|
|
948 |
record(ai, "$(IOC):$(NAME)-GET-CNT__")
|
|
|
949 |
{
|
|
|
950 |
field(DESC, "Read counter as long")
|
|
|
951 |
field(DTYP, "stream")
|
|
|
952 |
field(INP, "@devBronkhorst.proto readFloat(68,41) $(PORT)")
|
|
|
953 |
field(SCAN, "$(SCAN2)")
|
|
|
954 |
field(PINI, "YES")
|
|
|
955 |
field(FLNK, "$(IOC):$(NAME)-GET-CNT_")
|
|
|
956 |
}
|
|
|
957 |
|
|
|
958 |
record(ao, "$(IOC):$(NAME)-SET-CNT")
|
|
|
959 |
{
|
|
|
960 |
field(DESC, "Set counter")
|
|
|
961 |
field(FLNK, "$(IOC):$(NAME)-SET-CNT_")
|
|
|
962 |
}
|
|
|
963 |
|
|
|
964 |
record(aSub, "$(IOC):$(NAME)-SET-CNT_")
|
|
|
965 |
{
|
|
|
966 |
field(DESC, "Interpret long as float")
|
|
|
967 |
field(INPA, "$(IOC):$(NAME)-SET-CNT")
|
|
|
968 |
field(FTA, "FLOAT")
|
|
|
969 |
field(OUTA, "$(IOC):$(NAME)-SET-CNT__")
|
|
|
970 |
field(FTVA, "LONG")
|
|
|
971 |
field(SNAM, "writeFloat")
|
|
|
972 |
field(FLNK, "$(IOC):$(NAME)-SET-CNT__")
|
|
|
973 |
}
|
|
|
974 |
|
|
|
975 |
record(ao, "$(IOC):$(NAME)-SET-CNT__")
|
|
|
976 |
{
|
|
|
977 |
field(DESC, "Set counter as long")
|
|
|
978 |
field(DTYP, "stream")
|
|
|
979 |
field(OUT, "@devBronkhorst.proto writeFloat(68,41) $(PORT)")
|
|
|
980 |
field(FLNK, "$(IOC):$(NAME)-GET-CNT__")
|
|
|
981 |
}
|
|
|
982 |
|
|
|
983 |
record(aSub, "$(IOC):$(NAME)-SET-CNT-INIT_")
|
|
|
984 |
{
|
|
|
985 |
field(DESC, "Interpret long as float")
|
|
|
986 |
field(INPA, "$(IOC):$(NAME)-SET-CNT__")
|
|
|
987 |
field(FTA, "LONG")
|
|
|
988 |
field(OUTA, "$(IOC):$(NAME)-SET-CNT")
|
|
|
989 |
field(FTVA, "FLOAT")
|
|
|
990 |
field(SNAM, "readFloat")
|
|
|
991 |
field(PINI, "YES")
|
|
|
992 |
field(FLNK, "$(IOC):$(NAME)-SET-CNT")
|
|
|
993 |
}
|
|
|
994 |
|
|
|
995 |
|
|
|
996 |
################################################################################
|
|
|
997 |
# Read; Counter limit
|
|
|
998 |
################################################################################
|
|
|
999 |
record(ai, "$(IOC):$(NAME)-GET-CNT-LIM")
|
|
|
1000 |
{
|
|
|
1001 |
field(DESC, "Read counter limit")
|
|
|
1002 |
field(PREC, "3")
|
|
|
1003 |
}
|
|
|
1004 |
|
|
|
1005 |
record(aSub, "$(IOC):$(NAME)-GET-CNT-LIM_")
|
|
|
1006 |
{
|
|
|
1007 |
field(DESC, "Interpret long as float")
|
|
|
1008 |
field(INPA, "$(IOC):$(NAME)-GET-CNT-LIM__")
|
|
|
1009 |
field(FTA, "LONG")
|
|
|
1010 |
field(OUTA, "$(IOC):$(NAME)-GET-CNT-LIM")
|
|
|
1011 |
field(FTVA, "FLOAT")
|
|
|
1012 |
field(SNAM, "readFloat")
|
|
|
1013 |
field(FLNK, "$(IOC):$(NAME)-GET-CNT-LIM")
|
|
|
1014 |
}
|
|
|
1015 |
|
|
|
1016 |
record(ai, "$(IOC):$(NAME)-GET-CNT-LIM__")
|
|
|
1017 |
{
|
|
|
1018 |
field(DESC, "Read counter limit as long")
|
|
|
1019 |
field(DTYP, "stream")
|
|
|
1020 |
field(INP, "@devBronkhorst.proto readFloat(68,43) $(PORT)")
|
|
|
1021 |
field(PINI, "YES")
|
|
|
1022 |
field(FLNK, "$(IOC):$(NAME)-GET-CNT-LIM_")
|
|
|
1023 |
}
|
|
|
1024 |
|
|
|
1025 |
record(ao, "$(IOC):$(NAME)-SET-CNT-LIM")
|
|
|
1026 |
{
|
|
|
1027 |
field(DESC, "Set counter limit")
|
|
|
1028 |
field(PREC, "3")
|
|
|
1029 |
field(FLNK, "$(IOC):$(NAME)-SET-CNT-LIM_")
|
|
|
1030 |
}
|
|
|
1031 |
|
|
|
1032 |
record(aSub, "$(IOC):$(NAME)-SET-CNT-LIM_")
|
|
|
1033 |
{
|
|
|
1034 |
field(DESC, "Interpret long as float")
|
|
|
1035 |
field(INPA, "$(IOC):$(NAME)-SET-CNT-LIM")
|
|
|
1036 |
field(FTA, "FLOAT")
|
|
|
1037 |
field(OUTA, "$(IOC):$(NAME)-SET-CNT-LIM__")
|
|
|
1038 |
field(FTVA, "LONG")
|
|
|
1039 |
field(SNAM, "writeFloat")
|
|
|
1040 |
field(FLNK, "$(IOC):$(NAME)-SET-CNT-LIM__")
|
|
|
1041 |
}
|
|
|
1042 |
|
|
|
1043 |
record(ao, "$(IOC):$(NAME)-SET-CNT-LIM__")
|
|
|
1044 |
{
|
|
|
1045 |
field(DESC, "Set counter limit as INPlong")
|
|
|
1046 |
field(DTYP, "stream")
|
|
|
1047 |
field(OUT, "@devBronkhorst.proto writeFloat(68,43) $(PORT)")
|
|
|
1048 |
field(FLNK, "$(IOC):$(NAME)-GET-CNT-LIM__")
|
|
|
1049 |
}
|
|
|
1050 |
|
|
|
1051 |
record(aSub, "$(IOC):$(NAME)-SET-CNT-LIM-INIT_")
|
|
|
1052 |
{
|
|
|
1053 |
field(DESC, "Interpret long as float")
|
|
|
1054 |
field(INPA, "$(IOC):$(NAME)-SET-CNT-LIM__")
|
|
|
1055 |
field(FTA, "LONG")
|
|
|
1056 |
field(OUTA, "$(IOC):$(NAME)-SET-CNT-LIM")
|
|
|
1057 |
field(FTVA, "FLOAT")
|
|
|
1058 |
field(SNAM, "readFloat")
|
|
|
1059 |
field(PINI, "YES")
|
|
|
1060 |
field(FLNK, "$(IOC):$(NAME)-SET-CNT-LIM")
|
|
|
1061 |
}
|
|
|
1062 |
|
|
|
1063 |
################################################################################
|
|
|
1064 |
# Read/write PID parameters
|
|
|
1065 |
################################################################################
|
|
|
1066 |
record(ai, "$(IOC):$(NAME)-GET-P")
|
|
|
1067 |
{
|
|
|
1068 |
field(DESC, "Read P")
|
|
|
1069 |
field(PREC, "3")
|
|
|
1070 |
}
|
|
|
1071 |
|
|
|
1072 |
record(aSub, "$(IOC):$(NAME)-GET-P_")
|
|
|
1073 |
{
|
|
|
1074 |
field(DESC, "Interpret long as float")
|
|
|
1075 |
field(INPA, "$(IOC):$(NAME)-GET-P__")
|
|
|
1076 |
field(FTA, "LONG")
|
|
|
1077 |
field(OUTA, "$(IOC):$(NAME)-GET-P")
|
|
|
1078 |
field(FTVA, "FLOAT")
|
|
|
1079 |
field(SNAM, "readFloat")
|
|
|
1080 |
field(FLNK, "$(IOC):$(NAME)-GET-P")
|
|
|
1081 |
}
|
|
|
1082 |
|
|
|
1083 |
record(ai, "$(IOC):$(NAME)-GET-P__")
|
|
|
1084 |
{
|
|
|
1085 |
field(DESC, "Read P as long")
|
|
|
1086 |
field(SCAN, "Passive")
|
|
|
1087 |
field(DTYP, "stream")
|
|
|
1088 |
field(INP, "@devBronkhorst.proto readFloat(72,55) $(PORT)")
|
|
|
1089 |
field(PINI, "YES")
|
|
|
1090 |
field(FLNK, "$(IOC):$(NAME)-GET-P_")
|
|
|
1091 |
}
|
|
|
1092 |
|
|
|
1093 |
record(ao, "$(IOC):$(NAME)-SET-P")
|
|
|
1094 |
{
|
|
|
1095 |
field(DESC, "Set P")
|
|
|
1096 |
field(PREC, "3")
|
|
|
1097 |
field(FLNK, "$(IOC):$(NAME)-SET-P_")
|
|
|
1098 |
}
|
|
|
1099 |
|
|
|
1100 |
record(aSub, "$(IOC):$(NAME)-SET-P_")
|
|
|
1101 |
{
|
|
|
1102 |
field(DESC, "Interpret long as float")
|
|
|
1103 |
field(INPA, "$(IOC):$(NAME)-SET-P")
|
|
|
1104 |
field(FTA, "FLOAT")
|
|
|
1105 |
field(OUTA, "$(IOC):$(NAME)-SET-P__")
|
|
|
1106 |
field(FTVA, "LONG")
|
|
|
1107 |
field(SNAM, "writeFloat")
|
|
|
1108 |
field(FLNK, "$(IOC):$(NAME)-SET-P__")
|
|
|
1109 |
}
|
|
|
1110 |
|
|
|
1111 |
record(ao, "$(IOC):$(NAME)-SET-P__")
|
|
|
1112 |
{
|
|
|
1113 |
field(DESC, "Set P as INPlong")
|
|
|
1114 |
field(DTYP, "stream")
|
|
|
1115 |
field(OUT, "@devBronkhorst.proto writeFloat(72,55) $(PORT)")
|
|
|
1116 |
field(FLNK, "$(IOC):$(NAME)-GET-P__")
|
|
|
1117 |
}
|
|
|
1118 |
|
|
|
1119 |
record(ai, "$(IOC):$(NAME)-GET-I")
|
|
|
1120 |
{
|
|
|
1121 |
field(DESC, "Read I")
|
|
|
1122 |
field(PREC, "3")
|
|
|
1123 |
}
|
|
|
1124 |
|
|
|
1125 |
record(aSub, "$(IOC):$(NAME)-GET-I_")
|
|
|
1126 |
{
|
|
|
1127 |
field(DESC, "Interpret long as float")
|
|
|
1128 |
field(INPA, "$(IOC):$(NAME)-GET-I__")
|
|
|
1129 |
field(FTA, "LONG")
|
|
|
1130 |
field(OUTA, "$(IOC):$(NAME)-GET-I")
|
|
|
1131 |
field(FTVA, "FLOAT")
|
|
|
1132 |
field(SNAM, "readFloat")
|
|
|
1133 |
field(FLNK, "$(IOC):$(NAME)-GET-I")
|
|
|
1134 |
}
|
|
|
1135 |
|
|
|
1136 |
record(ai, "$(IOC):$(NAME)-GET-I__")
|
|
|
1137 |
{
|
|
|
1138 |
field(DESC, "Read I as long")
|
|
|
1139 |
field(SCAN, "Passive")
|
|
|
1140 |
field(DTYP, "stream")
|
|
|
1141 |
field(INP, "@devBronkhorst.proto readFloat(72,56) $(PORT)")
|
|
|
1142 |
field(PINI, "YES")
|
|
|
1143 |
field(FLNK, "$(IOC):$(NAME)-GET-I_")
|
|
|
1144 |
}
|
|
|
1145 |
|
|
|
1146 |
record(ao, "$(IOC):$(NAME)-SET-I")
|
|
|
1147 |
{
|
|
|
1148 |
field(DESC, "Set I")
|
|
|
1149 |
field(PREC, "3")
|
|
|
1150 |
field(FLNK, "$(IOC):$(NAME)-SET-I_")
|
|
|
1151 |
}
|
|
|
1152 |
|
|
|
1153 |
record(aSub, "$(IOC):$(NAME)-SET-I_")
|
|
|
1154 |
{
|
|
|
1155 |
field(DESC, "Interpret long as float")
|
|
|
1156 |
field(INPA, "$(IOC):$(NAME)-SET-I")
|
|
|
1157 |
field(FTA, "FLOAT")
|
|
|
1158 |
field(OUTA, "$(IOC):$(NAME)-SET-I__")
|
|
|
1159 |
field(FTVA, "LONG")
|
|
|
1160 |
field(SNAM, "writeFloat")
|
|
|
1161 |
field(FLNK, "$(IOC):$(NAME)-SET-I__")
|
|
|
1162 |
}
|
|
|
1163 |
|
|
|
1164 |
record(ao, "$(IOC):$(NAME)-SET-I__")
|
|
|
1165 |
{
|
|
|
1166 |
field(DESC, "Set I as INPlong")
|
|
|
1167 |
field(DTYP, "stream")
|
|
|
1168 |
field(OUT, "@devBronkhorst.proto writeFloat(72,56) $(PORT)")
|
|
|
1169 |
field(FLNK, "$(IOC):$(NAME)-GET-I__")
|
|
|
1170 |
}
|
|
|
1171 |
|
|
|
1172 |
record(ai, "$(IOC):$(NAME)-GET-D")
|
|
|
1173 |
{
|
|
|
1174 |
field(DESC, "Read D")
|
|
|
1175 |
field(PREC, "3")
|
|
|
1176 |
}
|
|
|
1177 |
|
|
|
1178 |
record(aSub, "$(IOC):$(NAME)-GET-D_")
|
|
|
1179 |
{
|
|
|
1180 |
field(DESC, "Interpret long as float")
|
|
|
1181 |
field(INPA, "$(IOC):$(NAME)-GET-D__")
|
|
|
1182 |
field(FTA, "LONG")
|
|
|
1183 |
field(OUTA, "$(IOC):$(NAME)-GET-D")
|
|
|
1184 |
field(FTVA, "FLOAT")
|
|
|
1185 |
field(SNAM, "readFloat")
|
|
|
1186 |
field(FLNK, "$(IOC):$(NAME)-GET-D")
|
|
|
1187 |
}
|
|
|
1188 |
|
|
|
1189 |
record(ai, "$(IOC):$(NAME)-GET-D__")
|
|
|
1190 |
{
|
|
|
1191 |
field(DESC, "Read D as long")
|
|
|
1192 |
field(SCAN, "Passive")
|
|
|
1193 |
field(DTYP, "stream")
|
|
|
1194 |
field(INP, "@devBronkhorst.proto readFloat(72,57) $(PORT)")
|
|
|
1195 |
field(PINI, "YES")
|
|
|
1196 |
field(FLNK, "$(IOC):$(NAME)-GET-D_")
|
|
|
1197 |
}
|
|
|
1198 |
|
|
|
1199 |
record(ao, "$(IOC):$(NAME)-SET-D")
|
|
|
1200 |
{
|
|
|
1201 |
field(DESC, "Set D")
|
|
|
1202 |
field(PREC, "3")
|
|
|
1203 |
field(FLNK, "$(IOC):$(NAME)-SET-D_")
|
|
|
1204 |
}
|
|
|
1205 |
|
|
|
1206 |
record(aSub, "$(IOC):$(NAME)-SET-D_")
|
|
|
1207 |
{
|
|
|
1208 |
field(DESC, "Interpret long as float")
|
|
|
1209 |
field(INPA, "$(IOC):$(NAME)-SET-D")
|
|
|
1210 |
field(FTA, "FLOAT")
|
|
|
1211 |
field(OUTA, "$(IOC):$(NAME)-SET-D__")
|
|
|
1212 |
field(FTVA, "LONG")
|
|
|
1213 |
field(SNAM, "writeFloat")
|
|
|
1214 |
field(FLNK, "$(IOC):$(NAME)-SET-D__")
|
|
|
1215 |
}
|
|
|
1216 |
|
|
|
1217 |
record(ao, "$(IOC):$(NAME)-SET-D__")
|
|
|
1218 |
{
|
|
|
1219 |
field(DESC, "Set D as INPlong")
|
|
|
1220 |
field(DTYP, "stream")
|
|
|
1221 |
field(OUT, "@devBronkhorst.proto writeFloat(72,57) $(PORT)")
|
|
|
1222 |
field(FLNK, "$(IOC):$(NAME)-GET-D__")
|
|
|
1223 |
}
|
|
|
1224 |
################################################################################
|
|
|
1225 |
################################################################################
|
|
|
1226 |
#STATUS PARAMETERS
|
|
|
1227 |
################################################################################
|
|
|
1228 |
################################################################################
|
|
|
1229 |
################################################################################
|
|
|
1230 |
# Read:Number of error messages. 0 - no error message, 1 - at least 1 error
|
|
|
1231 |
# message
|
|
|
1232 |
################################################################################
|
|
|
1233 |
record(bi, "$(IOC):$(NAME)-ERROR-MSG-NUM")
|
|
|
1234 |
{
|
|
|
1235 |
field(DESC, "Number of error mesgs")
|
|
|
1236 |
field(INP, "$(IOC):$(NAME)-GET-ALARM-INFO.B0")
|
|
|
1237 |
field(SCAN, "$(SCAN1)")
|
|
|
1238 |
field(ZNAM, "No error")
|
|
|
1239 |
field(ONAM, "Error")
|
|
|
1240 |
field(FLNK, "$(IOC):$(NAME)-WARNING-MSG-NUM")
|
|
|
1241 |
}
|
|
|
1242 |
|
|
|
1243 |
################################################################################
|
|
|
1244 |
# Read:Number of warning messages. 0 - no warning message, 1 - at least 1
|
|
|
1245 |
# warning message
|
|
|
1246 |
################################################################################
|
|
|
1247 |
record(bi, "$(IOC):$(NAME)-WARNING-MSG-NUM")
|
|
|
1248 |
{
|
|
|
1249 |
field(DESC, "Number of warning msgs")
|
|
|
1250 |
field(INP, "$(IOC):$(NAME)-GET-ALARM-INFO.B1")
|
|
|
1251 |
field(SCAN, "$(SCAN1)")
|
|
|
1252 |
field(ZNAM, "No warning")
|
|
|
1253 |
field(ONAM, "Warning")
|
|
|
1254 |
field(FLNK, "$(IOC):$(NAME)-MIN-ALARM")
|
|
|
1255 |
}
|
|
|
1256 |
|
|
|
1257 |
################################################################################
|
|
|
1258 |
# Read:Number of minimum alarm messages for measured signal.
|
|
|
1259 |
# 0 - no minimum alarm message,
|
|
|
1260 |
# 1 - at least 1 minumum alarm message
|
|
|
1261 |
################################################################################
|
|
|
1262 |
record(bi, "$(IOC):$(NAME)-MIN-ALARM")
|
|
|
1263 |
{
|
|
|
1264 |
field(DESC, "Number of min alarm msgs")
|
|
|
1265 |
field(INP, "$(IOC):$(NAME)-GET-ALARM-INFO.B2")
|
|
|
1266 |
field(SCAN, "$(SCAN1)")
|
|
|
1267 |
field(ZNAM, "No min alarm")
|
|
|
1268 |
field(ONAM, "Min alarm")
|
|
|
1269 |
field(FLNK, "$(IOC):$(NAME)-MAX-ALARM")
|
|
|
1270 |
}
|
|
|
1271 |
|
|
|
1272 |
################################################################################
|
|
|
1273 |
# Read:Number of maximum alarm messages for measured signal.
|
|
|
1274 |
# 0 - no maximum alarm message,
|
|
|
1275 |
# 1 - at least 1 maximum alarm message
|
|
|
1276 |
################################################################################
|
|
|
1277 |
record(bi, "$(IOC):$(NAME)-MAX-ALARM")
|
|
|
1278 |
{
|
|
|
1279 |
field(DESC, "Number of max alar msgs")
|
|
|
1280 |
field(INP, "$(IOC):$(NAME)-GET-ALARM-INFO.B3")
|
|
|
1281 |
field(SCAN, "$(SCAN1)")
|
|
|
1282 |
field(ZNAM, "No max alarm")
|
|
|
1283 |
field(ONAM, "Max alarm")
|
|
|
1284 |
field(FLNK, "$(IOC):$(NAME)-BATCH-CNT-ALARM")
|
|
|
1285 |
}
|
|
|
1286 |
|
|
|
1287 |
################################################################################
|
|
|
1288 |
# Read: 0 - Batch counter has not reached it's limit
|
|
|
1289 |
# 1 - Batch counter has reached it's limit
|
|
|
1290 |
################################################################################
|
|
|
1291 |
record(bi, "$(IOC):$(NAME)-BATCH-CNT-ALARM")
|
|
|
1292 |
{
|
|
|
1293 |
field(DESC, "Batch counter alarm")
|
|
|
1294 |
field(INP, "$(IOC):$(NAME)-GET-ALARM-INFO.B4")
|
|
|
1295 |
field(SCAN, "$(SCAN1)")
|
|
|
1296 |
field(ZNAM, "OK")
|
|
|
1297 |
field(ONAM, "Limit")
|
|
|
1298 |
field(FLNK, "$(IOC):$(NAME)-RESPONSE-ALARM")
|
|
|
1299 |
}
|
|
|
1300 |
|
|
|
1301 |
################################################################################
|
|
|
1302 |
# Read: 0 - Response OK (setpoint-measure within limit)
|
|
|
1303 |
# 1 - Response alarm message: setpoint-measure is too high
|
|
|
1304 |
################################################################################
|
|
|
1305 |
record(bi, "$(IOC):$(NAME)-RESPONSE-ALARM")
|
|
|
1306 |
{
|
|
|
1307 |
field(DESC, "Response alarm")
|
|
|
1308 |
field(INP, "$(IOC):$(NAME)-GET-ALARM-INFO.B5")
|
|
|
1309 |
field(SCAN, "$(SCAN1)")
|
|
|
1310 |
field(ZNAM, "OK")
|
|
|
1311 |
field(ONAM, "SP to high")
|
|
|
1312 |
field(FLNK, "$(IOC):$(NAME)-MASTER-OUT-ALARM")
|
|
|
1313 |
}
|
|
|
1314 |
|
|
|
1315 |
################################################################################
|
|
|
1316 |
# Read: 0 - Master output signal OK (or unused)
|
|
|
1317 |
# 1 - Master output signal not received: check master instrument
|
|
|
1318 |
################################################################################
|
|
|
1319 |
record(bi, "$(IOC):$(NAME)-MASTER-OUT-ALARM")
|
|
|
1320 |
{
|
|
|
1321 |
field(DESC, "Master output alarm")
|
|
|
1322 |
field(INP, "$(IOC):$(NAME)-GET-ALARM-INFO.B6")
|
|
|
1323 |
field(SCAN, "$(SCAN1)")
|
|
|
1324 |
field(ZNAM, "OK")
|
|
|
1325 |
field(ONAM, "Not received")
|
|
|
1326 |
field(FLNK, "$(IOC):$(NAME)-HARDWARE-ALARM")
|
|
|
1327 |
}
|
|
|
1328 |
|
|
|
1329 |
################################################################################
|
|
|
1330 |
# Read: 0 - Hardware OK
|
|
|
1331 |
# 1 - Hardware error message: check your hardware
|
|
|
1332 |
################################################################################
|
|
|
1333 |
record(bi, "$(IOC):$(NAME)-HARDWARE-ALARM")
|
|
|
1334 |
{
|
|
|
1335 |
field(DESC, "Response alarm")
|
|
|
1336 |
field(INP, "$(IOC):$(NAME)-GET-ALARM-INFO.B7")
|
|
|
1337 |
field(SCAN, "$(SCAN1)")
|
|
|
1338 |
field(ZNAM, "OK")
|
|
|
1339 |
field(ONAM, "Error")
|
|
|
1340 |
}
|
|
|
1341 |
|
|
|
1342 |
|
|
|
1343 |
################################################################################
|
|
|
1344 |
# Read: Check if communication is OK
|
|
|
1345 |
################################################################################
|
|
|
1346 |
record(calc, "$(IOC):$(NAME)-COMM-STATUS")
|
|
|
1347 |
{
|
|
|
1348 |
field(DESC, "Communication status")
|
|
|
1349 |
field(INPA, "$(IOC):$(NAME)-GET-MEASURE_.STAT")
|
|
|
1350 |
field(CALC, "A>0")
|
|
|
1351 |
field(FLNK, "$(IOC):$(NAME)-ALARM")
|
|
|
1352 |
}
|
|
|
1353 |
|
|
|
1354 |
################################################################################
|
|
|
1355 |
# Read; Sum of communication and device errors. If either device or comm. is in
|
|
|
1356 |
# error, value is 1. LED on the main screen uses this to determine if everything
|
|
|
1357 |
# is ok.
|
|
|
1358 |
################################################################################
|
|
|
1359 |
record(calc, "$(IOC):$(NAME)-ALARM")
|
|
|
1360 |
{
|
|
|
1361 |
field(DESC, "Communication status")
|
|
|
1362 |
field(INPA, "$(IOC):$(NAME)-COMM-STATUS")
|
|
|
1363 |
field(INPB, "$(IOC):$(NAME)-GET-ALARM-INFO.B0")
|
|
|
1364 |
field(INPC, "$(IOC):$(NAME)-GET-ALARM-INFO.B1")
|
|
|
1365 |
field(INPD, "$(IOC):$(NAME)-GET-ALARM-INFO.B2")
|
|
|
1366 |
field(INPE, "$(IOC):$(NAME)-GET-ALARM-INFO.B3")
|
|
|
1367 |
field(INPF, "$(IOC):$(NAME)-GET-ALARM-INFO.B5")
|
|
|
1368 |
field(INPG, "$(IOC):$(NAME)-GET-ALARM-INFO.B6")
|
|
|
1369 |
field(INPH, "$(IOC):$(NAME)-GET-ALARM-INFO.B7")
|
|
|
1370 |
field(CALC, "(A+B+C+D+E+F+G+H)>0")
|
|
|
1371 |
}
|
|
|
1372 |
|
|
|
1373 |
################################################################################
|
|
|
1374 |
# Lock/unlock secured parameters, e.g. PID parameters
|
|
|
1375 |
################################################################################
|
|
|
1376 |
|
|
|
1377 |
record(ai, "$(IOC):$(NAME)-GET-INITRESET__")
|
|
|
1378 |
{
|
|
|
1379 |
field(DESC, "Get locked/unlocked")
|
|
|
1380 |
field(DTYP, "stream")
|
|
|
1381 |
field(SCAN, "$(SCAN1)")
|
|
|
1382 |
field(INP, "@devBronkhorst.proto readChar(00,0A) $(PORT)")
|
|
|
1383 |
field(PINI, "YES")
|
|
|
1384 |
field(FLNK, "$(IOC):$(NAME)-GET-INITRESET_")
|
|
|
1385 |
}
|
|
|
1386 |
|
|
|
1387 |
record(calcout, "$(IOC):$(NAME)-GET-INITRESET_"){
|
|
|
1388 |
field(CALC, "(A=82)?0:(A=64)?1:2")
|
|
|
1389 |
field(INPA, "$(IOC):$(NAME)-GET-INITRESET__")
|
|
|
1390 |
field(OUT, "$(IOC):$(NAME)-GET-INITRESET")
|
|
|
1391 |
field(FLNK, "$(IOC):$(NAME)-GET-INITRESET")
|
|
|
1392 |
}
|
|
|
1393 |
|
|
|
1394 |
record(mbbo, "$(IOC):$(NAME)-GET-INITRESET")
|
|
|
1395 |
{
|
|
|
1396 |
field(DESC, "Locked/unlocked")
|
|
|
1397 |
field(ZRVL, "0")
|
|
|
1398 |
field(ZRST, "Lock")
|
|
|
1399 |
field(ONVL, "1")
|
|
|
1400 |
field(ONST, "Unlock")
|
|
|
1401 |
field(TWVL, "2")
|
|
|
1402 |
field(TWST, "Unknown")
|
|
|
1403 |
}
|
|
|
1404 |
|
|
|
1405 |
record(mbbo, "$(IOC):$(NAME)-SET-INITRESET")
|
|
|
1406 |
{
|
|
|
1407 |
field(DESC, "Lock/unlock")
|
|
|
1408 |
field(ZRVL, "0")
|
|
|
1409 |
field(ZRST, "Lock")
|
|
|
1410 |
field(ONVL, "1")
|
|
|
1411 |
field(ONST, "Unlock")
|
|
|
1412 |
field(OUT, "$(IOC):$(NAME)-SET-INITRESET_")
|
|
|
1413 |
field(FLNK, "$(IOC):$(NAME)-SET-INITRESET_")
|
|
|
1414 |
}
|
|
|
1415 |
|
|
|
1416 |
record(calcout, "$(IOC):$(NAME)-SET-INITRESET_"){
|
|
|
1417 |
field(CALC, "(A=1)?64:82")
|
|
|
1418 |
field(INPA, "$(IOC):$(NAME)-SET-INITRESET")
|
|
|
1419 |
field(OUT, "$(IOC):$(NAME)-SET-INITRESET__")
|
|
|
1420 |
field(FLNK, "$(IOC):$(NAME)-SET-INITRESET__")
|
|
|
1421 |
}
|
|
|
1422 |
|
|
|
1423 |
record(ao, "$(IOC):$(NAME)-SET-INITRESET__")
|
|
|
1424 |
{
|
|
|
1425 |
field(DESC, "Send Lock/unlock")
|
|
|
1426 |
field(DTYP, "stream")
|
|
|
1427 |
field(SCAN, "$(SCAN1)")
|
|
|
1428 |
field(OUT, "@devBronkhorst.proto writeChar(00,0A) $(PORT)")
|
|
|
1429 |
field(FLNK, "$(IOC):$(NAME)-GET-INITRESET__")
|
|
|
1430 |
}
|